AUDIO
Mostrando 193–216 de 574 resultados
- $369.00
Conjunto de audio inalámbrico fácil de usar con un solo toque que utiliza una transmisión digital para enlazar sin problemas las fuentes de audio. Esta elegante solución hace que la conexión inalámbrica con instrumentos sea más fácil que nunca, al tiempo que mantiene una conexión confiable.
- Facilidad de uso con un solo toque
- Transmisión digital de 2.4 GHz para funcionar en todo el mundo
- Rango de 75 m (250 pies) en condiciones óptimas
- Hasta 5 horas de duración de la batería con una sola carga
- Cambie entre múltiples transmisores vinculados a un receptor
- Configure cualquier combinación de transmisores y receptores
- Desactive el sonido desde el transmisor o el receptor
- Dimensiones
- XSW-D XLR FEMALE TX: aprox. 102 x 24 x 28 mmXSW-D MINI JACK TX: aprox. 86 x 24 x 28 mmXSW-D INSTRUMENT TX: aprox. 122 x 24 x 28 mmXSW-D XLR MALE RX: aprox. 109 x 24 x 28 mmXSW-D MINI JACK RX: aprox. 86 x 24 x 28 mmXSW-D INSTRUMENT RX: aprox. 122 x 24 x 28 mmXSW-D PEDALBOARD RX: aprox. 130 x 82 x 51 mm
- THD, distorsión armónica total
- < 0.1%
- Tiempo de cargado
- tip. 3 h
- Salida de audio
- máx. 12 dBu
- Rango de temperatura (en servicio)
- -10°C a +55°C (14°F a 131°F)
- Relación señal-ruido
- ≥ 106 dB
- Tiempo de operación
- hasta 5 h
- Modulación
- GFSK con TDMA
- Especificaciones de la batería
- Li-Ion
- Capacidad
- 850 mAh
- Codificador
- aptX® Live
- Rango de frecuencias
- 2,400 – 2,483.5MHz
- Voltaje de entrada máximo
- tip. 5.0 V
- Potencia de transmisión
- máx. 10 mW
- Voltaje
- 3.7 V
- Humedad relativa del aire en funcionamiento
- 95% (sin condensación)
- Latencia
- < 4 ms
- Rango de temperatura
- 0°C – 60°C (32°F – 140°F)
- Respuesta de frecuencia de audio
- Conector de 3.5 mm/XLR: 80 – 18,000 HzConector de 6.3 mm: 10 – 18,000 Hz
$369.00 Añadir al carritoSENNHEISER SISTEMA INALAMBRICO DE INSTRUMENTO XSW-D
Ver Más - $359.00
Conjunto de audio inalámbrico fácil de usar con un solo toque que utiliza una transmisión digital para enlazar sin problemas las fuentes de audio. Equipada con un transmisor XLR y un receptor de 3.5mm (1/8”), esta elegante solución hace que capturar entrevistas con un dinámico micrófono de mano sea más fácil que nunca, al tiempo que mantiene una conexión confiable.
- Facilidad de uso con un solo toque
- Transmisión digital de 2.4 GHz para funcionar en todo el mundo
- Rango de 75 m (250 pies) en condiciones óptimas
- Hasta 5 horas de duración de la batería con una sola carga
- Cambie entre múltiples transmisores enlazados con un receptor
- Configure cualquier combinación de transmisores y receptores
- Desactive el sonido desde el transmisor o el receptor
- Dimensiones
- XSW-D XLR FEMALE TX: aprox. 102 x 24 x 28 mmXSW-D MINI JACK TX: aprox. 86 x 24 x 28 mmXSW-D INSTRUMENT TX: aprox. 122 x 24 x 28 mmXSW-D XLR MALE RX: aprox. 109 x 24 x 28 mmXSW-D MINI JACK RX: aprox. 86 x 24 x 28 mmXSW-D INSTRUMENT RX: aprox. 122 x 24 x 28 mmXSW-D PEDALBOARD RX: aprox. 130 x 82 x 51 mm
- THD, distorsión armónica total
- < 0.1%
- Tiempo de cargado
- tip. 3 h
- Salida de audio
- máx. 12 dBu
- Rango de temperatura (en servicio)
- -10°C a +55°C (14°F a 131°F)
- Relación señal-ruido
- ≥ 106 dB
- Tiempo de operación
- hasta 5 h
- Modulación
- GFSK con TDMA
- Especificaciones de la batería
- Li-Ion
- Capacidad
- 850 mAh
- Codificador
- aptX® Live
- Rango de frecuencias
- 2,400 – 2,483.5MHz
- Voltaje de entrada máximo
- tip. 5.0 V
- Potencia de transmisión
- máx. 10 mW
- Voltaje
- 3.7 V
- Humedad relativa del aire en funcionamiento
- 95% (sin condensación)
- Latencia
- < 4 ms
- Rango de temperatura
- 0°C – 60°C (32°F – 140°F)
- Respuesta de frecuencia de audio
- Conector de 3.5 mm/XLR: 80 – 18,000 HzConector de 6.3 mm: 10 – 18,000 Hz
$359.00 Añadir al carritoSENNHEISER SISTEMA INALAMBRICO XSW-D INTERVIEW SET
Ver Más - $486.61
Inspira a tu audiencia. Obtén el sistema XS WIRELESS 1 y confía en una transmisión inalámbrica sólida con hasta 10 canales compatibles y una banda UHF estable.
El set de micrófono solapa XS WIRELESS 1 es un sistema inalámbrico todo en uno y fácil de usar para oradores públicos y presentadores, excelente para una presentación poderosa e inspiradora.
El set incluye un receptor estacionario intuitivo, además de un transmisor de bolsillo compacto y discreto micrófono con clip.- Transmisor de bolsillo compacto, micrófono de clip discreto
- Recepción diversity con antena conmutable
- Antenas integradas
- Gestión de frecuencia automática y sincronización a través de un canal remoto para una fácil configuración
- Frecuencias UHF seleccionables dentro de una amplia banda ancha
- Hasta 10 canales compatibles
$486.61 Añadir al carritoSENNHEISER XSW-1 ME2 506980
-6% PAGO EN EFECTIVOVer Más - $149.00
CARACTERÍSTICAS
- Entradas:
- 2 entradas combinadas XLR-1/4 ″ de micrófono / línea
- 1 entrada de instrumento Hi-Z conmutable
- Salidas:
- 2 TRS balanceadas de 1/4 ”
- Salida de auriculares de 1 1/4 ″
- Alimentación fantasma (+ 48V): Sí
- USB: 2.0, alimentado por bus
- Controles del panel frontal: ganancia de entrada de canal, LED de pico, alimentación fantasma, monitorización de entrada, volumen de auriculares y maestro
- Compatibilidad:
- Windows 7, 8.1, 10 (ASIO 2.0, MMe, WDM, DirectSound)
- Mac OS X 10.7 (y superior) a través de CoreAudio (no se requiere instalación de controlador)
- Conversión A / D / A: 24 bits / 96 kHz (máx.)
- Rango dinámico de ADC: 102dBA @ 48kHz, SNR = 102dBA @ 48kHz
- Rango dinámico DAC: 108dBA @ 48kHz, SNR = 108dBA @ 48kHz
$149.00 Añadir al carritoKURZWEIL INTERFACE UNITE-2
Ver Más - Entradas:
- $251.62
- Altavoces:
- (1) Driver de baja frecuencia de 10″ (8Ω)
- (1) Driver de alta frecuencia de 3″ (3Ω)
- Potencia: 35W RMS
- Entradas: (1) Entrada de línea 1/4″
- Bluetooth: Sí
- Sensibilidad de entrada: -10 dBu
- Sensibilidad: 92 dB
- Respuesta de frecuencia: 70Hz – 18kHz
- Impedancia del altavoz: 10″ 8Ω
- Ecualización (EQ): Graves, Agudos (+/- 12dB, curva en forma de campana)
- Peso: 21.8 lb (9.9 Kg)
- Dimensiones: 16.7 x 16.5 x 13.2 pulgadas (42.4 x 42 x 33.5 cm)
- Alimentación de CA: Adaptador externo de 24VDC, 2.5A
- Consumo de corriente: 1.8A máximo
- Alimentación de batería: 12V/7.0 Ah, Recargable, capacidad máxima de 3 horas
$251.62 Añadir al carritoKURZWEIL KDA35 AMPLIFICADOR
Ver Más - Altavoces:
- $387.88
- Altavoces: 2 x 6.5″, 1 x 3″ (4Ω)
- Potencia: 12W + 12W
- Gabinete: Bass Reflex (puerto trasero)
- Asas telescópicas y fijas
- Ruedas traseras
- Entradas: (2) 1/4″ para micrófono, (2) 1/4″ para instrumento, 1/8″ Aux
- Receptor inalámbrico: Incorporado VHF 200-270MHz
- Reproductor de música: MP3 a través de USB, entrada de tarjeta SD/MMC
- EQ: Graves y agudos
- Efectos: Reverb, Delay, Activador (realce armónico)
- Incluye: Micrófono de mano, Lavalier inalámbrico con paquete de cinturón para micrófono
- Peso: 21.7 lb (9.82 Kg)
- Dimensiones: 11.4 x 15.4 x 7.3 pulgadas (29 x 39 x 18.5 cm)
$387.88 Añadir al carritoKURZWEIL KST300A AMPLIFICADOR
Ver Más - $189.00
La interfaz de hardware RCF TRK PRO2 es un estudio USB 2.0 en miniatura con todas las conexiones necesarias para enviar señales de micrófonos, instrumentos o fuentes de nivel de línea a una computadora con macOS o Windows. El circuito interno del preamplificador de 2 canales permite conectar micrófonos que usen alimentación phantom de 48 V e instrumentos de alta impedancia. Las señales de entrada se pueden enrutar a una estación de trabajo (DAW) a una resolución de hasta 24 bits y 192 kHz; igualmente, la monitorización de software y directo se puede enrutar a sus salidas balanceadas con mezcla ajustable. La interfaz se puede conectar a un amplificador con altavoces, monitores amplificados, auriculares, mezcladores analógicos u otros dispositivos de audio analógico.
CARACTERÍSTICAS
- Interfaz de audio USB 2.0 con alimentación por el bus USB, con 2 entradas y 2 salidas
- Hasta 24 bits y 192 kHz
- 2 entradas combo para micrófono o señal de instrumento/línea
- Preamplificadores de alta calidad
- Control de ganancia independiente con LED de pico de señal
- Monitorización sin latencia
- Control de volumen independiente para auriculares
- Salidas balanceadas
- Ideal para realizar mediciones con RDnet
- Incluye orejas para montaje en rack
Sin existencias
$189.00 Leer másRCF INTERFACE TRK PRO 2
AGOTADOVer Más - $144.00
La interfaz de hardware RCF TRK PRO1 es un estudio USB 2.0 en miniatura con todas las conexiones necesarias para enviar señales de micrófonos, instrumentos o fuentes de nivel de línea a una computadora con macOS o Windows. El circuito interno lineal del preamplificador permite conectar micrófonos que usen alimentación phantom de 48 V e instrumentos de alta impedancia. Las señales de entrada se pueden enrutar a una estación de trabajo (DAW) a una resolución de hasta 24 bits y 192 kHz. La interfaz se puede conectar a un amplificador con altavoces, monitores amplificados, auriculares, mezcladores analógicos o cualquier tipo de dispositivo de audio analógico.
CARACTERÍSTICAS
- Interfaz de audio USB 2.0 con alimentación por el bus USB, con 1 entrada y 2 salidas
- Hasta 24 bits y 192 kHz
- 1 entrada combo para micrófono o señal de instrumento/línea
- Preamplificador de alta calidad
- Control de ganancia independiente con LED de pico de señal
- Salidas balanceadas
- Control de volumen independiente para auriculares
- Alimentación phantom de 48 V
- Carcasa resistente de metal
- Ideal para realizar mediciones con RDnet
Sin existencias
$144.00 Leer másRCF INTERFACE TRK PRO1
AGOTADOVer Más -
$69.00 Añadir al carrito
SENNHEISER MICROFONO XS 1
Ver Más INSTALACION PARA ESTERIORES AQUA RIVER PARK
- 1 consola MACKIE PROFX 6 V3
- 1 amplificador QSC ISA 500
- 1 Amplificador QSC SPA 2-200
- 8 parlantes BOSE Free space 360
- 2 parlantes RCF P2110
- 2 Parlantes BOSE Panarray 302 de exteriores
Leer másAQUA RIVER PARK
Ver MásSISTEMA DE SONIDO PARA EVENTOS Y RECINTO
- CAJAS ACTIVAS RCF EVOX J8
- CONSOLA MACKIE PRO FX
- MICROFONOS SENNHEISER
- CAJAS PASIVAS DE LARGO ALCANCE RCF P 3115
- AMPLIFICADOR QSC RMX 2450
- CABLES DE CONEXION PROEL Y SKY
Leer másASOCIACION DE GANADEROS ASOGAN SANTO DOMINGO DE LOS TSACHILAS
Ver Más- $590.00
El ANTDA4161 es un accesorio inalámbrico que presenta antenas direccionales activas de banda ancha diseñadas para mejorar la recepción en el rango de frecuencia de 522 a 865 MHz. Estas antenas son compatibles con cables coaxiales estándar equipados con conectores BNC. Las características clave del ANTDA4161 incluyen una ganancia amplificada de 15 dB, compensando la pérdida de señal a distancias largas. Esto lo hace especialmente adecuado para aplicaciones que requieren una mejora en la recepción de señal y es un compañero ideal para su uso con el sistema de distribución de antenas ADS48.
$590.00 Añadir al carritoAUDIX ANTENA ANTDA4161
Ver Más -
$269.00 Añadir al carrito
AUDIX ADX20 IP
Ver Más -
$19.00 Añadir al carrito
AUDIX ANT AB1 1/4 WAVE UHF WHIP ANTENNA
Ver Más - $679.00
El AP41 VX5 es un sistema inalámbrico de micrófono que consta de un receptor de diversidad R41 y un transmisor de mano H60/VX5 con el micrófono de condensador Audix VX5.
El micrófono VX5 es versátil y está diseñado para aplicaciones en el escenario, estudio y transmisión. Ofrece una respuesta de frecuencia suave y detallada, es resistente a la retroalimentación y puede manejar niveles de presión sonora muy altos sin distorsión.
BANDAS DE FRECUENCIA DISPONIBLES:
- A = 522 MHz – 554 MHz
- B = 554 MHz – 586 MHz
CARACTERÍSTICAS: Receptor R41:
- Receptor de diversidad con amplio espectro de 32 MHz.
- 106 frecuencias pre-coordinadas para una configuración rápida y confiable.
- Búsqueda automática de un solo toque para encontrar un canal claro.
- Sincronización de un solo toque que vincula el transmisor al receptor mediante un haz infrarrojo.
Transmisor de mano H60 VX5:
- Transmisor de amplio espectro de 64 MHz con módulo de cápsula dinámica VX5.
- Carcasa metálica duradera.
- Tiempo de funcionamiento de 14 horas con baterías AA.
$679.00 Añadir al carritoAUDIX AP41 VX5 MICROFONO INALMABRICO DE MANO
Ver Más - $1,081.00
El AP42 OM5 es un sistema inalámbrico de micrófono que incluye el receptor de diversidad de dos canales R42 y dos transmisores de mano H60/OM5, con el legendario micrófono dinámico Audix OM5.
El micrófono OM5 ha ganado un gran respeto desde mediados de los años 90 y se ha convertido en uno de los micrófonos dinámicos de mano más respetados en el mundo. Es utilizado en escenarios, estudios y aplicaciones de transmisión, y destaca por su claridad, resistencia a la retroalimentación y la capacidad para manejar niveles de presión sonora superiores a 144 dB sin distorsión.
BANDAS DE FRECUENCIA DISPONIBLES:
- A = 522 MHz – 554 MHz
- B = 554 MHz – 586 MHz
RECEPTOR DE DIVERSIDAD DE DOS CANALES R42:
- Sintonización de amplio espectro de 32 MHz para dos canales.
- 106 frecuencias pre-coordinadas para una configuración rápida y confiable.
- Búsqueda automática de un solo toque para encontrar un canal claro.
- Sincronización de un solo toque que vincula el transmisor al receptor mediante un haz infrarrojo.
TRANSMISOR DE MANO H60 OM5:
- Transmisor de amplio espectro de 64 MHz con cápsula dinámica OM5.
- Carcasa metálica duradera.
- Tiempo de funcionamiento de 14 horas con baterías AA.
$1,081.00 Añadir al carritoAUDIX AP42 OM5 2 MICROFONOS INALMABRICOS DE MANO
Ver Más - $129.00
La serie ATS1 consiste en soportes de mesa resistentes a impactos con un interruptor de encendido/apagado con bloqueo. Los modelos incluyen ATS1, ATS1LX y ATS1LP. Estos soportes de mesa son programables y cuentan con un indicador LED sin necesidad de fuentes de alimentación externas, simplificando la instalación y eliminando costos adicionales asociados con el cableado.
Características Principales:
- Base resistente a impactos fabricada con aleación de zinc de alta precisión.
- Acabado duradero en negro E-coat.
- Indicadores LED.
- Interruptor mecánico sin ruido.
- Funciones programables: Toggle On, Toggle Off, Momentary Talk y Momentary Mute.
- Filtro de corte bajo para protección contra frecuencias bajas no deseadas.
- Modelos ATS1LX y ATS1LP pueden ser programados para operar con sistemas de teleconferencia automatizados y sistemas de conmutación en modo de control lógico externo.
Variantes del Modelo:
- ATS1: Soporte de mesa resistente con conector XLR, filtro de corte bajo, indicador LED, interruptor programable de encendido/apagado con funciones momentáneas de hablar, presionar para hablar y presionar para silenciar.
- ATS1LX: Incluye circuito lógico para control remoto. Conector de salida XLR de 5 pines o conector phoenix.
- ATS1LP: Similar al ATS1LX, con conectores phoenix.
- ATS10: Soporte de mesa resistente con interruptor LED de encendido/apagado con bloqueo y conector XLR.
$129.00 Añadir al carritoAUDIX ATS 10 BASE DE MICROFONO
Ver Más - $458.98
El M1280B es un micrófono de condensador miniaturizado con un preamplificador totalmente integrado y un cable desmontable. Este micrófono tiene completa inmunidad a las interferencias de radiofrecuencia causadas por teléfonos celulares y dispositivos GSM. Está equipado con una cápsula cardioide y también está disponible con cápsulas hipercardioide, omnidireccional o shotgun. El M1280B tiene una respuesta de frecuencia muy amplia y se puede utilizar en una amplia variedad de aplicaciones en escenarios, estudios y transmisiones.
El M1280B, gracias a su diseño compacto, es adecuado para una amplia variedad de aplicaciones, como tambores, percusión, instrumentos musicales, micrófono aéreo en escenarios, podios, conferencias y presentaciones. Se suministra con una amplia variedad de clips y accesorios que permiten utilizar el micrófono de diversas maneras.
Diseñado, mecanizado, ensamblado y probado por Audix en los Estados Unidos.
$458.98 Añadir al carritoAUDIX M1280B MICROFONO CONDENSADOR
Ver Más - $499.00
El micrófono Audix M70 es un micrófono de condensador empotrable con las siguientes características:
- Tipo de transductor: Condensador
- Respuesta de frecuencia: 60 Hz – 10 kHz
- Patrón polar: Cardioide
- Impedancia de salida: 150 ohmios
- Sensibilidad: 38 mV / Pa a 1 kHz
- Nivel de ruido equivalente: 22 dB
- Relación señal-ruido: 72 dB
- SPL máximo: ≥130 dB
- Rango dinámico: 108 dB
- Requisitos de alimentación: 18 – 52 V de alimentación phantom
- Conector: Conector de bloque de terminales
- Polaridad: Presión positiva en el diafragma produce voltaje positivo en el pin 2 con respecto al pin 3 del conector XLR de salida
- Materiales / Acabado: Latón, aluminio y acero en color blanco o niquelado
- Cable recomendado: Belden 9451 P o 82761
- Longitud: 176 mm / 6.9 in
Este micrófono ha sido diseñado para ser empotrado y ofrece un patrón polar cardioide, lo que significa que es más sensible a los sonidos que provienen de la parte frontal, mientras que es menos sensible a los sonidos que provienen de los lados y la parte posterior. La alimentación phantom de 18-52 V es estándar para micrófonos de condensador.
$499.00 Añadir al carritoAUDIX M70W MICROFONO DE CONDENSADOR EMPOTRABLE
Ver Más -
$25.00 Añadir al carrito
AUDIX MALLA PARA SERIE OM/GR-357
Ver Más - $149.00
Aplicaciones
– Rack toms, congas, toms de piso
– Cabinets de guitarra y bajo
– Saxofón, latón$149.00 Añadir al carritoAUDIX MICROFONO DE BATERIA D2
Ver Más - $199.00
Con una amplia respuesta de frecuencia de 40 Hz – 18 kHz y la capacidad de manejar SPLs superiores a 144 dB, el micrófono de instrumentos dinámicos D4 es una excelente opción para micrófonos que requieren reproducción precisa de baja frecuencia, como toms de rack grandes, toms de piso, cajón, djembe, tímpano, fondo leslie, flauta baja, saxofón y saxofón barítono, trombón, bajo acústico, gabinetes de bajo y pequeños tambores.
El D4 es ligero, compacto y fácil de colocar. Utilizado para aplicaciones de escenario, estudio y transmisión, el micrófono de instrumento dinámico D4 está diseñado con un patrón de captación hipercardioide para aislamiento y control de retroalimentación. El hipercardioide D4 también está equipado con un diafragma VLM ™ para una reproducción de sonido natural y precisa.
– Escenario en vivo o grabación
– Tom de rack grande, tom de piso, pequeño bombo
– Cajon, djembe, tympani, leslie bottom
– Flauta baja, saxo y saxo barítono, trombón
– Bajo acústico, cabinas de bajo$199.00 Añadir al carritoAUDIX MICROFONO DE BATERIA D4
Ver Más - $89.00
Funciones de Audix f2 Instrument Microphone de un vistazo:
- Micrófono ideal para escenario y estudio
- Perfecto para rack toms, floor toms, congas, djembe, guitarra y bajo, latón
- El patrón de captación hipercardioide te proporciona un gran aislamiento
- Resistente y apto para circular
- Construido en los Estados Unidos
Especificaciones técnicas
- Tipo de micrófono:dinámico
- Patrón polar:hipercardioide
- Respuesta de frecuencia:52Hz-15kHz
- Impedancia de salida:580 ohmios
- Color:negro
- Conector:XLR
- Peso:0.54 lbs.
- Accesorios incluidos:soporte de montaje, bolsa de micrófono
- Número de parte del fabricante:f2
$89.00 Añadir al carritoAUDIX MICROFONO DE BATERIA F2
Ver Más -
El precio original era: $139.00.$125.10El precio actual es: $125.10. Añadir al carrito
AUDIX MICROFONO DE BATERIA F6
Ver Más
All products loaded