Descripción
Directional pattern
Supercardioid
Principle of operation
Pressure gradient
Cartridge type
Pre-polarized condenser
Frequency response
20 Hz – 20 kHz
Effective frequency range ± 2 dB, at 20 cm (7.9 in)
80 Hz – 15 kHz with 2 dB soft boost at 10-12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz
6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A))
Distortion, THD < 1%
128 dB SPL RMS, 131 dB SPL peak
Dynamic range
Typ. 108 dB
Max. SPL, THD 10%
142 dB SPL peak
Rated output impedance
From MicroDot: 30 – 40 Ω. From DAD4099-BC or DAD6001-BC: 100 Ω
Cable drive capability
Up to 300 m (984 ft) with DAD6001-BC/DAD4099-BC XLR Adapter
Output balance principle
Signal balanced with DAD4099-BC or DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR)
> 60 dB from 50 Hz to 15 kHz with DAD4099-BC or DAD6001-BC XLR Adapter
Power supply (for full performance)
For wireless systems Min. 5 V – max. 10 V through DPA adapter
With DAD6001-BC or DAD4099-BC: P48 (Phantom power). Will work from 12 V
With DAD6001-BC or DAD4099-BC: P48 (Phantom power). Will work from 12 V
Current consumption
Typ. 1.5 mA (microphone). 3.5 mA with DAD4099-BC or DAD6001-BC XLR Adapter
Connector
MicroDot
Color
Black
Weight
27 g (0.95 oz)
Microphone diameter
5.4 mm (0.21 in)
Microphone length
45 mm (1.8 in)
Cable length
1.8 m (5.9 ft)
Cable diameter
1.6 mm (0.06 in) / 2.2 mm (0.09 in)
Polarity
+V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099-BC or DAD6001-BC XLR adapter)
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%
Gooseneck length
140 mm (5.5 in)
