Tienda
Mostrando 241–264 de 1314 resultados
- $144.00
La interfaz de hardware RCF TRK PRO1 es un estudio USB 2.0 en miniatura con todas las conexiones necesarias para enviar señales de micrófonos, instrumentos o fuentes de nivel de línea a una computadora con macOS o Windows. El circuito interno lineal del preamplificador permite conectar micrófonos que usen alimentación phantom de 48 V e instrumentos de alta impedancia. Las señales de entrada se pueden enrutar a una estación de trabajo (DAW) a una resolución de hasta 24 bits y 192 kHz. La interfaz se puede conectar a un amplificador con altavoces, monitores amplificados, auriculares, mezcladores analógicos o cualquier tipo de dispositivo de audio analógico.
CARACTERÍSTICAS
- Interfaz de audio USB 2.0 con alimentación por el bus USB, con 1 entrada y 2 salidas
- Hasta 24 bits y 192 kHz
- 1 entrada combo para micrófono o señal de instrumento/línea
- Preamplificador de alta calidad
- Control de ganancia independiente con LED de pico de señal
- Salidas balanceadas
- Control de volumen independiente para auriculares
- Alimentación phantom de 48 V
- Carcasa resistente de metal
- Ideal para realizar mediciones con RDnet
Sin existencias
$144.00 Leer másRCF INTERFACE TRK PRO1
AGOTADOVer Más -
$69.00 Añadir al carrito
SENNHEISER MICROFONO XS 1
Ver Más - $415.23
Cuando solo el sonido gordo y cálido de un altavoz de 15 pulgadas haga el trabajo, recomendamos encarecidamente el SVT-15E. Armado con un enorme imán de cinco libras, el altavoz de 15″ diseñado a medida del SVT-15E genera un extremo inferior que salta en el pecho como si no fuera asunto de nadie, hasta los 33 Hz. Combínalo con el cabezal SVT-CL y un SVT-410HE, para la gama alta, y te garantizamos que la pista de baile se mueva.
- Jacks de 1⁄4″ y Neutrik Speakon®
- Capa de álamo
CARACTERÍSTICAS
- Controladores LF: 1 x 15″ de reparto
- Bobina de voz: 2,5″
- Peso del imán (cada uno): 80 oz
- Manejo de potencia RMS: 200 vatios
- Respuesta de frecuencia (-3dB): 50Hz-3kHz
- Baja frecuencia utilizable (-10dB): 33 Hz
- Impedancia nominal: 8 ohmios
- Sensibilidad: 98dB
- SPL máximo: 123dB
- Dimensiones (An x Al x Al pulgadas): 24 x 22 x 16
- Peso: 72 libras
Sin existencias
$415.23 Leer másAMPEG ALTAVOZ BAJO B115E
AGOTADOVer Más - $1,998.00
Esta es la nevera. Esta es la cabina de altavoces que posee el escenario. Esta es la cabina de altavoces que quieres tener.
El diseño SVT-810E Infinite BaffleTM se ha mantenido constante desde 1969 y ofrece el sonido contundente y redondo que define el tono Ampeg. La capacidad combinada de movimiento de aire de ocho altavoces de 10 pulgadas reacciona más rápido a los transitorios que los quince o dieciocho. El resultado es un sonido que puedes sentir, que el público puede sentir y que realmente ofrece lo que quieres de una plataforma de graves. En pocas palabras, el SVT-810E produce la gran cantidad de bajos bien enfocados que su banda necesita. En el mundo de las cabinas de bajo de alto rendimiento, la Ampeg SVT-810E es alta y orgullosa.
- Recinto de madera contrachapada de abedul báltico de alta resistencia
- El diseño Infinite BaffleTM añade impacto
- Jacks Speakon de 1/4″ y Neutrik®
- Ruedas empotradas resistentes y rieles deslizantes
- Corte y acabado de la serie Ampeg Classic
CARACTERÍSTICAS
- Controladores LF: 8 x 10″
- Bobina de voz: 2″
- Peso del imán (cada uno): 30 oz
- Manejo de potencia RMS: 2 x 400 vatios (estéreo)
- Manejo de potencia RMS: 800 vatios (mono)
- Respuesta de frecuencia (-3dB): 58Hz-5kHz
- Baja frecuencia utilizable (-10dB): 40 Hz
- Impedancia nominal: 2 x 8 ohmios (estéreo)
- Impedancia nominal: 4 ohmios (mono)
- Sensibilidad: 100dB
- SPL máximo: 130dB
- Dimensiones (ancho x alto x ancho pulgadas): 26 x 48 x 16
- Peso del envío: 165 libras
- Peso de manipulación: 140 libras
$1,998.00 Añadir al carritoAMPEG ALTAVOZ BAJO SVT 810E
Ver Más - $234.00
El combo RB-108 de 30 vatios es el amplificador de práctica ideal tanto para profesionales como para principiantes. El clásico EQ de 3 bandas y la nueva sobremarcha Super Grit TechnologyTM facilitan la marcación en el legendario tono Ampeg, mientras que una entrada auxiliar te permite tocar junto con el audio externo de tu elección, y una salida de auriculares garantiza que podrás practicar cuando quieras sin molestar a otros.
- Combo de 30 vatios y 1×8
- Estilo vintage con características modernas
- Preamplificador Ampeg Legacy
- Sobremarcha de Super Grit Technology (SGTTM)
- Entradas de 0dB y -15dB
- Entrada auxiliar y salida de auriculares
- 23 libras. (10,5 kg)
$234.00 Añadir al carritoAMPEG AMPLIFICADOR RB-108
Ver Más - $359.00
El RB-110 de 50 vatios es un amplificador ideal para practicar y tocar en lugares pequeños. El clásico EQ de 3 bandas y la nueva sobremarcha Super Grit TechnologyTM facilitan el marcado en el legendario tono Ampeg. Además, una entrada auxiliar te permite tocar junto con audio externo, mientras que una salida de auriculares garantiza que podrás practicar cuando quieras sin molestar a otros. Una salida XLR proporciona una conexión profesional a un P.A. o grabadora.
- Combo de 50 vatios y 1×10
- Estilo vintage con características modernas
- Preamplificador Ampeg Legacy
- Sobremarcha de Super Grit Technology (SGTTM)
- Entradas de 0dB y -15dB
- Entrada auxiliar y salida de auriculares
- Salida directa XLR
- 22,5 libras. (10,2 kg)
Sin existencias
$359.00 Leer másAMPEG AMPLIFICADOR RB-110
AGOTADOVer Más - $659.00
El RB-112 de 100 vatios cuenta con un altavoz Eminence® personalizado de 12″ y es una opción perfecta para practicar, actuar y grabar. Los interruptores clásicos Ampeg EQ de 3 bandas y Ultra Hi/Ultra Lo, combinados con el nuevo circuito de sobremarcha Super Grit TechnologyTM, te permiten marcar fácilmente el legendario tono Ampeg. Las características adicionales incluyen una entrada auxiliar, una salida de auriculares, un bucle de efectos y una salida XLR que proporciona una conexión profesional a un sistema de aire o una grabadora.
- 100 vatios
- Altavoz Eminence personalizado de 12″
- Estilo vintage con características modernas
- Preamplificador Ampeg Legacy
- Overdrive SGTTM conmutable
- Entrada auxiliar y salida de auriculares
- Bucle de efectos
- Salida directa XLR
- 25,9 libras (11,75 kg)
$659.00 Añadir al carritoAMPEG AMPLIFICADOR RB-112
Ver Más - $829.00
El RB-115 de 200 vatios es un amplificador de gigging y grabación excepcional con un altavoz Eminence® personalizado de 15″. Los interruptores clásicos Ampeg EQ de 3 bandas y Ultra Hi/Ultra Lo se combinan con el nuevo circuito de sobremarcha Super Grit TechnologyTM para ofrecer el legendario tono Ampeg. Las características adicionales incluyen una entrada auxiliar, una salida de auriculares, un bucle de efectos, una salida de altavoz de extensión y una salida XLR que proporciona una conexión profesional a un P.A. o grabadora.
- 200 vatios
- Altavoz Eminence personalizado de 15″
- Preamplificador Ampeg Legacy con ecualizador de 3 bandas
- Overdrive SGTTM conmutable
- Entrada auxiliar y salida de auriculares
- Bucle de efectos
- Altavoz de extensión y salidas directas XLR
- 34 libras. (15,45 kg)
$829.00 Añadir al carritoAMPEG AMPLIFICADOR RB-115
Ver Más - $1,014.00
El RB-210 de 500 vatios es el amplificador de gigging portátil ideal. Los altavoces Eminence® de 10″ personalizados de doble, junto con una bocina mutable de alta frecuencia, reproducen una amplia gama de sonidos de graves, mientras que el clásico EQ de 3 bandas Ampeg, los interruptores Ultra Hi/Ultra Lo y el nuevo circuito de sobremarcha Super Grit TechnologyTM le permiten marcar su tono ideal. Un bucle de efectos, una entrada auxiliar, una salida de auriculares, una salida de altavoz de extensión y una salida directa XLR para conectarse a una puerta de aire o grabadora completan el paquete.
- 500 vatios
- Altavoces Eminencia personalizados de 10″ + bocina HF
- Preamplificador Ampeg Legacy con ecualizador de 3 bandas
- Overdrive SGTTM conmutable
- Entrada auxiliar y salida de auriculares
- Bucle de efectos
- Altavoz de extensión y salidas directas XLR
- 39 libras. (17,7 kg)
$1,014.00 Añadir al carritoAMPEG AMPLIFICADOR RB-210
Ver Más - $1,719.00
El sonido está en tu cabeza. Has tocado innumerables instrumentos en busca del mejor alma gemela. Ahora necesitas un amplificador que hable tu sonido al público. Ahí es donde entra en juego el SVT-3PRO. Hay una razón por la que este amplificador es un éxito de ventas: ¡en entrega los productos! Con hasta 450 vatios y el dulce sonido de los tubos, el SVT-3PRO es la mejor opción de rockeros y funkmeisters de todo el mundo.
Se trata de tono. El control de frecuencia del SVT-3PRO le permite seleccionar la frecuencia central para el control de rango medio, lo que le da una opción de cinco «voces» distintas para el rango medio. Las frecuencias centrales son de 220 Hz, 450 Hz, 800 Hz, 1,6 kHz y 3 kHz. Y si eso no es suficiente, puedes usar el ecualizador gráfico de 9 bandas para personalizar aún más tu sonido. O usa el ecualizador para configurar un «segundo canal» conmutable para tu solo de bajo.
El SVT-3PRO ofrece tono y rendimiento SVT (con algunas mejoras modernas) en un práctico diseño de montaje en rack. Tamaño moderado, potencia significativa y sonido redondo Ampeg genuino… todo lo que un bajista serio necesita. Docenas de artistas de clase mundial dependen del SVT-3PRO para hacer el trabajo, día tras día.
- Control de accionamiento del tubo
- Salidas de 1/4″ y Neutrik Speakon®
- LED de pico de entrada
- Almohadilla de entrada e interruptor brillante
- Interruptor de silencio y salida del sintonizador
CARACTERÍSTICAS
- Salida de potencia RMS (8 ohmios): 275 vatios
- Salida de potencia RMS (4 ohmios): 450 vatios
- Preamplificador: Tubos (3 x 12AX7)
- Tubos del conductor: 1 x 12AX7, 1 x 12AU7
- Amplificador de potencia: estado sólido
- Controles de tono: 3 bandas
- Control de tono medio: 5 posiciones
- Ecualizador gráfico: Sí, 9 bandas
- Impulsos ultra bajos/altos: Sí
- Línea de salida equilibrada: Sí, pre/post con elevación y nivel del suelo
- Bucle de efectos: Sí
- Salida de preamplificador/enciida de potencia: Sí
- Dimensiones (ancho x alto x ancho): 19 x 3,5 x 15,5
- Peso: 26 libras
Sin existencias
$1,719.00 Leer másAMPEG CABEZAL DE BAJO SVT 3PRO
AGOTADOVer Más - $939.00
El PF-800 ofrece el rendimiento superior de los cabezales de bajo de la serie Portaflex de Ampeg en un diseño ultracompacto de 800 vatios, perfecto para bajistas hambrientos de energía que exigen un tono sin concesiones. Conéctalo a un par de carcasas de graves Portaflex para un equipo de estilo vintage que es extremadamente potente, portátil e innegablemente Ampeg.
CARACTERÍSTICAS
- Potencia de salida RMS: 800 W a 4 ohmios
- Preamplificador: MOSFET
- Amplificador de potencia: Clase D
- Controles de tono: graves, medios, agudos
- Control de tono medio: 5 posiciones
- Impulsos Ultra Hi/Lo
- Compresor a bordo
- Equilibrado directamente
- Opción de ecualización previa/post
- -Alfombrilla de 40 dB
- Elevado en tierra
- Bucle FX con control de mezcla dedicado (pie conmutable)
- Amplificador de alimentación/salida del preamplificador
- Salida/línea de auriculares de 1/8″
- Almohadilla de entrada de 15 dB
- Silencio (pie conmutable)
- Fuente de alimentación: conmutación
- Dimensiones: 80 x 381 x 272 mm
- Peso de manipulación: 11,8 libras / 5,35 kg
$939.00 Añadir al carritoAMPEG CABEZAL PARA BAJO PF 800
Ver Más - $46.00
- Pedalera de dos botones
- Interruptor de selección de canal
- Interruptor de arranque
- Compatible con amplificadores de guitarra a Ampeg válvulas
- Ideal para GVT52-112 y GVT52-212 Amplificadores
$46.00 Añadir al carritoAMPEG PEDAL GVT F S1
Ver Más INSTALACION PARA ESTERIORES AQUA RIVER PARK
- 1 consola MACKIE PROFX 6 V3
- 1 amplificador QSC ISA 500
- 1 Amplificador QSC SPA 2-200
- 8 parlantes BOSE Free space 360
- 2 parlantes RCF P2110
- 2 Parlantes BOSE Panarray 302 de exteriores
Leer másAQUA RIVER PARK
Ver Más-
$69.00 Añadir al carrito
ASIENTO DE PIANO BENCH
Ver Más SISTEMA DE SONIDO PARA EVENTOS Y RECINTO
- CAJAS ACTIVAS RCF EVOX J8
- CONSOLA MACKIE PRO FX
- MICROFONOS SENNHEISER
- CAJAS PASIVAS DE LARGO ALCANCE RCF P 3115
- AMPLIFICADOR QSC RMX 2450
- CABLES DE CONEXION PROEL Y SKY
Leer másASOCIACION DE GANADEROS ASOGAN SANTO DOMINGO DE LOS TSACHILAS
Ver Más- $590.00
El ANTDA4161 es un accesorio inalámbrico que presenta antenas direccionales activas de banda ancha diseñadas para mejorar la recepción en el rango de frecuencia de 522 a 865 MHz. Estas antenas son compatibles con cables coaxiales estándar equipados con conectores BNC. Las características clave del ANTDA4161 incluyen una ganancia amplificada de 15 dB, compensando la pérdida de señal a distancias largas. Esto lo hace especialmente adecuado para aplicaciones que requieren una mejora en la recepción de señal y es un compañero ideal para su uso con el sistema de distribución de antenas ADS48.
$590.00 Añadir al carritoAUDIX ANTENA ANTDA4161
Ver Más -
$269.00 Añadir al carrito
AUDIX ADX20 IP
Ver Más -
$19.00 Añadir al carrito
AUDIX ANT AB1 1/4 WAVE UHF WHIP ANTENNA
Ver Más - $679.00
El AP41 VX5 es un sistema inalámbrico de micrófono que consta de un receptor de diversidad R41 y un transmisor de mano H60/VX5 con el micrófono de condensador Audix VX5.
El micrófono VX5 es versátil y está diseñado para aplicaciones en el escenario, estudio y transmisión. Ofrece una respuesta de frecuencia suave y detallada, es resistente a la retroalimentación y puede manejar niveles de presión sonora muy altos sin distorsión.
BANDAS DE FRECUENCIA DISPONIBLES:
- A = 522 MHz – 554 MHz
- B = 554 MHz – 586 MHz
CARACTERÍSTICAS: Receptor R41:
- Receptor de diversidad con amplio espectro de 32 MHz.
- 106 frecuencias pre-coordinadas para una configuración rápida y confiable.
- Búsqueda automática de un solo toque para encontrar un canal claro.
- Sincronización de un solo toque que vincula el transmisor al receptor mediante un haz infrarrojo.
Transmisor de mano H60 VX5:
- Transmisor de amplio espectro de 64 MHz con módulo de cápsula dinámica VX5.
- Carcasa metálica duradera.
- Tiempo de funcionamiento de 14 horas con baterías AA.
$679.00 Añadir al carritoAUDIX AP41 VX5 MICROFONO INALMABRICO DE MANO
Ver Más - $1,081.00
El AP42 OM5 es un sistema inalámbrico de micrófono que incluye el receptor de diversidad de dos canales R42 y dos transmisores de mano H60/OM5, con el legendario micrófono dinámico Audix OM5.
El micrófono OM5 ha ganado un gran respeto desde mediados de los años 90 y se ha convertido en uno de los micrófonos dinámicos de mano más respetados en el mundo. Es utilizado en escenarios, estudios y aplicaciones de transmisión, y destaca por su claridad, resistencia a la retroalimentación y la capacidad para manejar niveles de presión sonora superiores a 144 dB sin distorsión.
BANDAS DE FRECUENCIA DISPONIBLES:
- A = 522 MHz – 554 MHz
- B = 554 MHz – 586 MHz
RECEPTOR DE DIVERSIDAD DE DOS CANALES R42:
- Sintonización de amplio espectro de 32 MHz para dos canales.
- 106 frecuencias pre-coordinadas para una configuración rápida y confiable.
- Búsqueda automática de un solo toque para encontrar un canal claro.
- Sincronización de un solo toque que vincula el transmisor al receptor mediante un haz infrarrojo.
TRANSMISOR DE MANO H60 OM5:
- Transmisor de amplio espectro de 64 MHz con cápsula dinámica OM5.
- Carcasa metálica duradera.
- Tiempo de funcionamiento de 14 horas con baterías AA.
$1,081.00 Añadir al carritoAUDIX AP42 OM5 2 MICROFONOS INALMABRICOS DE MANO
Ver Más - $129.00
La serie ATS1 consiste en soportes de mesa resistentes a impactos con un interruptor de encendido/apagado con bloqueo. Los modelos incluyen ATS1, ATS1LX y ATS1LP. Estos soportes de mesa son programables y cuentan con un indicador LED sin necesidad de fuentes de alimentación externas, simplificando la instalación y eliminando costos adicionales asociados con el cableado.
Características Principales:
- Base resistente a impactos fabricada con aleación de zinc de alta precisión.
- Acabado duradero en negro E-coat.
- Indicadores LED.
- Interruptor mecánico sin ruido.
- Funciones programables: Toggle On, Toggle Off, Momentary Talk y Momentary Mute.
- Filtro de corte bajo para protección contra frecuencias bajas no deseadas.
- Modelos ATS1LX y ATS1LP pueden ser programados para operar con sistemas de teleconferencia automatizados y sistemas de conmutación en modo de control lógico externo.
Variantes del Modelo:
- ATS1: Soporte de mesa resistente con conector XLR, filtro de corte bajo, indicador LED, interruptor programable de encendido/apagado con funciones momentáneas de hablar, presionar para hablar y presionar para silenciar.
- ATS1LX: Incluye circuito lógico para control remoto. Conector de salida XLR de 5 pines o conector phoenix.
- ATS1LP: Similar al ATS1LX, con conectores phoenix.
- ATS10: Soporte de mesa resistente con interruptor LED de encendido/apagado con bloqueo y conector XLR.
$129.00 Añadir al carritoAUDIX ATS 10 BASE DE MICROFONO
Ver Más - $458.98
El M1280B es un micrófono de condensador miniaturizado con un preamplificador totalmente integrado y un cable desmontable. Este micrófono tiene completa inmunidad a las interferencias de radiofrecuencia causadas por teléfonos celulares y dispositivos GSM. Está equipado con una cápsula cardioide y también está disponible con cápsulas hipercardioide, omnidireccional o shotgun. El M1280B tiene una respuesta de frecuencia muy amplia y se puede utilizar en una amplia variedad de aplicaciones en escenarios, estudios y transmisiones.
El M1280B, gracias a su diseño compacto, es adecuado para una amplia variedad de aplicaciones, como tambores, percusión, instrumentos musicales, micrófono aéreo en escenarios, podios, conferencias y presentaciones. Se suministra con una amplia variedad de clips y accesorios que permiten utilizar el micrófono de diversas maneras.
Diseñado, mecanizado, ensamblado y probado por Audix en los Estados Unidos.
$458.98 Añadir al carritoAUDIX M1280B MICROFONO CONDENSADOR
Ver Más - $499.00
El micrófono Audix M70 es un micrófono de condensador empotrable con las siguientes características:
- Tipo de transductor: Condensador
- Respuesta de frecuencia: 60 Hz – 10 kHz
- Patrón polar: Cardioide
- Impedancia de salida: 150 ohmios
- Sensibilidad: 38 mV / Pa a 1 kHz
- Nivel de ruido equivalente: 22 dB
- Relación señal-ruido: 72 dB
- SPL máximo: ≥130 dB
- Rango dinámico: 108 dB
- Requisitos de alimentación: 18 – 52 V de alimentación phantom
- Conector: Conector de bloque de terminales
- Polaridad: Presión positiva en el diafragma produce voltaje positivo en el pin 2 con respecto al pin 3 del conector XLR de salida
- Materiales / Acabado: Latón, aluminio y acero en color blanco o niquelado
- Cable recomendado: Belden 9451 P o 82761
- Longitud: 176 mm / 6.9 in
Este micrófono ha sido diseñado para ser empotrado y ofrece un patrón polar cardioide, lo que significa que es más sensible a los sonidos que provienen de la parte frontal, mientras que es menos sensible a los sonidos que provienen de los lados y la parte posterior. La alimentación phantom de 18-52 V es estándar para micrófonos de condensador.
$499.00 Añadir al carritoAUDIX M70W MICROFONO DE CONDENSADOR EMPOTRABLE
Ver Más -
$25.00 Añadir al carrito
AUDIX MALLA PARA SERIE OM/GR-357
Ver Más
All products loaded